How to install Wiikey 2 Modchip Complete Guide Diagram Tutorial

Wiikey 2 Modchip Install Guide and Diagram

The Wiikey2 modchip is one of the most popular Wii modchips available.
With advanced features and protection against bricking, it is the choice of installers and end users alike.
With a little practice, it is relatively easy to install one of these yourself,
but if you have never picked up a soldering iron, you should find an installer to do this for you.

If you are still here, you have probably decided to go ahead and install your wiikey2 modchip yourself.
The Wiikey 2 modchip install diagram shown below shows all the necessary points for installing your wiikey 2.
For DMS, D2A and D2B (including cut pin D2B) solder only the points shown in RED.
For D2C, D2C2 and D2E you will also need to solder the point shown in BLUE.
If you have a D2E with eject issues, you may be able to fix this by using one
of the alternate ground points ( in GREEN) or using both the normal ground point and an alternate point.
The best positions for placing the Wiikey 2 modchip are also shown in the Diagram.

Technical Specifications

• Compatible with all current chipsets; DMS, D2A, D2B, D2C, D2C-2 and D2E
• Compatible with all regions, USA, JAP, PAL and KOREA
• 5 wires for DMS, D2A, D2B.
• 6 wires for D2C, D2C2, D2E.
• Compatible with D2B “cut pin” or “cut leg”drives (does not require the cut pins to be connected)
• Fully configurable and updatable via DVD update disc
• Advanced automatic region detection with fallback (works even if a drive is changed to a different region Wii)
• Region override for Wii and Gamecube games
• Direct Boot of Wii original, import, and backup games
• Direct Boot of Gamecube original, import, and backup games
• Direct boot of homebrew in GC mode
• Supports multi-disc games, DVD-R, +R, +RW (no bitsetting required)
• Supports Dual Layer
• Supports factory made ‘silvers’, even with incorrect header data
• Supports, SMG, SSBB, Mario Kart and other ‘problem’ titles
• Streaming audio-fix for Gamecube games
• Diskspeed configurable via DVD, with separate settings for different media types
• Recovery mode makes it impossible to brick the chip with a bad flash
• 8Mbit onboard flash for storing data and applications
• Rock solid performance with 3.3V FPGA core and high quality components
• Multifrequency Ringpiece Oscillators (MRO) for optimum performance, even with problem drives
• Onboard status LEDs