How to install a Wasabi DX modchip in your Wii Complete Guide and Video Tutorial

How to install a Wasabi DX modchip in your Wii
– Complete Guide and Video Tutorial.    

Buy from our Online store Solderless Wasabi DX (Click Here)
A step-by-step tutorial to make things easy for installing your Wasabi DX modchip in your Wii console.


To install the Wasabi DX Modchip in your Wii, you will first need to follow our
You will also need:

  • A Wasabi DX
  • Electrical Tape
  • Triwing screwdriver (for opening the Wii)
  • Once your Wii is apart and the dvd drive is removed, grab your Wasabi DX modchip.
    Check the dip switches on the Wasabi DX and configure them to your region.

    Wasabi DX Dip Switches

    The ribbon cable that goes to your Wii console should be connected to the plug shown on the right in the picture below.
    The ribbon cable that comes with the Wasabi DX should be connected to the plug shown on the left in the picture below.

    Wasabi DX Install, Ribbon Cables

    The other end of the ribbon should be connected to the Wii DVD Drive.

    Position the Wasabi DX modchip on the metal of the Wii console.
    Place it so none of the ribbon cables will be damaged when the console is re-assembled and stick it down with electrical tape.
    Make sure you use enough to completely cover the Wasabi DX modchip.
    Thats it.
    Congratulations.

    No comments yet.
    No trackbacks yet.